DeepSeek V4.1 Pro is only a name, so a fair test pits MIDM K 3.0 Pro against V4 Pro
A router vendor says DeepSeek V4.1 Pro has no model card, price or endpoint, so comparisons with it are guesses. Here is what can actually be tested.
The short version
- DeepSeek named V4.1 Pro once, in the September 10 release notes for V4.1 Flash, and has published nothing since.
- MIDM K 3.0 Pro: 120B total parameters, 12B active, priced at $0.20 input and $0.80 output per million tokens.
- DeepSeek V4 Pro 0813: 1.6 trillion parameters, 1 million token context, $0.66 input and $1.98 output off-peak.
- Artificial Analysis scores DeepSeek V4 Pro 36 and V4.1 Flash 39.5; MIDM K 3.0 Pro has no entry.
- KT is the only provider of MIDM K 3.0 Pro, so any fallback has to be written in your own code.
Why it matters
Model names are marketing labels, and a comparison built on a label with nothing behind it can mislead your budget and your tests. Record the exact model you call, and test on your own prompts before you trust any table, including the one in this story.
A name with nothing behind it
As OrcaRouter reported, searches for "MIDM K 3.0 Pro vs DeepSeek V4.1 Pro" assume two models exist. Only one does. DeepSeek V4.1 Pro has no model card, no endpoint, no price entry and no downloadable weights.
The name appeared once, in the release notes for DeepSeek V4.1 Flash on September 10. Those notes said requests to the existing Pro tier would be sent to the Flash model until V4.1 Pro arrived. Developers objected, since Pro customers would be getting a smaller model at Pro prices without being told. DeepSeek reversed the plan after about a day and brought DeepSeek V4 Pro back at the same price.
What remains is a footnote. Specs that circulate for V4.1 Pro are extrapolations from the Flash release, and OrcaRouter argues they should not be repeated as fact.
The two models you can actually call
MIDM K 3.0 Pro comes from KT, a Korean company. It has 120B total parameters, with 12B active for each token. It is a hybrid stack of Mamba layers (a design that handles long text cheaply), mixture-of-experts layers (only part of the network runs per token) and ordinary attention layers. Its context window is 261,795 tokens, and it can output up to 235,615.
DeepSeek V4 Pro 0813 is the previous-generation flagship. It is a mixture-of-experts model with 1.6 trillion parameters, 49B of them active. It handles text only, with a context of 1 million tokens and output up to 384K.
DeepSeek's model has roughly thirteen times the parameters and four times the context. It also offers thinking and non-thinking modes, three reasoning-effort levels, tool calling and a native Responses API tuned for Codex-style coding agents.
Price depends on the clock
MIDM K 3.0 Pro lists at $0.20 per million input tokens and $0.80 per million output tokens, with cached input at $0.04. KT's own platform currently sells it at a 30% discount: $0.14 in, $0.56 out. No end date for that promotion has been published, so budget from list price.
DeepSeek V4 Pro 0813 costs $0.66 in and $1.98 out off-peak. On weekdays from 01:00 to 04:00 and 06:00 to 10:00 UTC, prices double to $1.32 and $3.96. Cached reads cost $0.022 off-peak.
On list prices, the Korean model charges about a third as much for input and about 40% as much for output. Because DeepSeek's peak-hour pricing is a permanent structure while KT's discount is temporary, neither the cheapest nor the dearest figure is the right planning number.
What has been measured, and what hasn't
Artificial Analysis gives DeepSeek V4 Pro a 36 on its Intelligence Index. That is well below the 50s where the top frontier models sit, but it is a real measurement of a real endpoint. DeepSeek V4.1 Flash, the model that did ship in the V4.1 generation, scores 39.5.
MIDM K 3.0 Pro has no entry. The evaluator returns a 404 for it, and KT published no benchmark table at launch, only architecture, quantization and context details. Aggregator sites that show a composite score for it are mixing price and recency with capability, not reporting test results.
So the question buyers care about, whether a $0.20 model can match a $0.66 one, cannot be answered from published material. DeepSeek also reports its own agent-benchmark figures for the 0813 revision, such as 87.9 on Terminal Bench 2.1, but those are vendor-reported.
Context, tools and a single point of failure
The 262K window is a real limit if you send a whole code repository, a full case file or hours of transcript. Truncation fails silently: the model answers confidently from half the document. Chunking helps, and at these prices MIDM K 3.0 Pro could read a document four times over for less than DeepSeek's off-peak single pass. But extracting facts survives chunking, while finding a contradiction between page 4 and page 300 usually does not.
On tools, DeepSeek lists tools and tool_choice among its supported parameters. KT's catalog entry does not. That does not mean the endpoint rejects them, only that nobody has documented it, so agent loops that depend on function calling need testing.
There is also a supply issue. KT is the sole host of MIDM K 3.0 Pro, so if its endpoint slows down you cannot route around it. OrcaRouter sells access to DeepSeek models, so weigh its framing accordingly.
A one-afternoon test
OrcaRouter's suggestion is sensible whatever its commercial angle: take fifty prompts from your own production traffic, run them on both models, and score them with a grader you already trust. Fifty prompts with 4K input and 1K output cost under a cent on the Korean model and a few cents on DeepSeek's.
Then run the same fifty on DeepSeek V4.1 Flash, priced at $0.15 in and $0.60 out off-peak. For many workloads the honest answer to "do I need DeepSeek's Pro tier?" may be no, and Flash is both cheap and independently scored.
What to watch
- Will DeepSeek publish a model card, price and endpoint for V4.1 Pro, or drop the name?
- Will anyone publish independent benchmark results for MIDM K 3.0 Pro?
- When does KT's 30% discount end, and does tool-calling support get documented?
Try it
Pull fifty real prompts from your own usage, run them on each model you are considering, and log the exact model identifier your provider returns with every response.
Sources and links
- ReportingOrcaRouter: the article we sourced
First reported by OrcaRouter. Written by the SI Agent News Desk from the reporting above.Written with AI from the source above. Every number is checked against the source. Spot a mistake? Corrections.
Liked it? Say why
Add a line for other readers.
No account needed. We never show your email. Comments with links, ads or abuse are held and not shown. Your comment shows after a quick check.